マイクロコントローラ - MCU

MPUマイクロプロセッサ

RFマイクロコントローラ - MCU

マイクロコントローラ

CPU - 中央処理装置

デジタル・シグナル・プロセッサ

プロセッサ - 特殊アプリケーション

プロセッサ

Microcontrollers and processors are semiconductor devices that contain a central processing unit (CPU) and other supporting circuitry. They are used in computers and similar devices that require computing power (e.g., mobile phones). Today they are used in a wide variety of products &mdash; from microwave ovens to satellites, and are often used in circuits called digital boards, motherboards, controllers, or motherboards.  A microcontroller is a special kind of CPU-oriented chip, often used in embedded applications where cost, power, and size are important.

マイクロコントローラ&プロセッサ

アインクSRAM

ダイナミックランダムアクセスメモリ

eMMCの

GDDRの

マルチチップパッケージ

NANDフラッシュ

NORフラッシュ

ラム

同期SRAM

メモリIC

メモリモジュール

ソリッドステートドライブ - SSD

メモリモジュールとカード

Memory is any device that can store and read digital information. It is an important part of any computer system, along with the central processing unit (CPU) and storage, which also holds digital information. Traditionally, memory holds data that is needed for the current CPU programme and cannot be stored in the CPU cache. Contrast this with storage, which is typically used for long-term storage of static data.   Memory has several important characteristics. Capacity is the maximum number of bits that can be stored in memory, usually measured in gigabytes (GiB). Speed is the maximum number of bits per second that the memory can achieve in a read and/or write operation, usually measured in gigabytes per second. Wait time describes how quickly the memory responds to a read or write request, and is usually around a few billionths of a second (ns). The most common memory technology today is Dynamic Random Access Memory, or DRAM. DRAM is volatile memory, which means that if the power is cut off, the information stored will not be retained. There are several subclasses of DRAM, each with advantages for certain applications. Traditionally, double-double-rate (DDR) memory can be found in personal computers as well as servers. For mobile and embedded applications such as mobile phones, tablet devices and netbooks, low-voltage DDR (LPDDR) is sufficient. Graphics DDR (GDDR) is a high-performance memory used primarily in graphics workstations or graphics cards.

記憶

コンパレータ

差動アンプ

ホールディングアンプ

計装アンプ

リミティングアンプ

対数アンプ

オペアンプ

プレシジョンアンプ

アンプ&コンパレータ

オーディオアンプ

ビデオアンプ

マルチメディアアンプ

電流感応型アンプ

高速オペアンプ

LCDガンマバッファ

RFアンプ

特殊用途アンプ

その他のアンプ

An amplifier is an electronic device that increases the amplitude of an electrical signal. The effect is known as amplifier gain. Amplifiers can be categorised by class and type, which evolved from vacuum tube (valve) technology to semiconductor transistor-based devices. Valve operation follows the principle that the emission of hot ions from a hot filament in a vacuum is controlled by a control gate. They are still used today for high power applications such as radar. Semiconductor amplifiers operate by diffusing charge carriers into a semiconductor junction controlled by an electric field, and it is the most common off-the-shelf amplifier today.

アンプ

Filter is a semiconductor product which performs basic single processing functions to remove unwanted frequencies, also referred to as noise. Filters are available in a number of different types, such as passive and active, analog and digital, linear and nonlinear. The most well know filters are low-pass, high-pass, band-pass and band-stop. Filters are found in a variety of different applications but are most popular in audio and multimedia applications. A filter is an electronic network where the output voltage, current, or power varies in a predictable way with the input frequency. Filters can be designed to pass high frequencies and block low frequencies or pass only low frequencies or pass/block only a specific band of frequencies or any other combination.

フィルター

A capacitor is a passive electrical component with two terminals. The two terminals store electromagnetic energy in the form of an electric field. The terminals are connected to two conductor plates filled with dielectric material between them. The capacitor stores an electric charge on its conductor plates. The electrically charged conductor plates separated by the dielectric construct an electric field.

コンデンサー

バッテリープロテクター

ESDサージ保護IC

回路保護

A circuit protection device protects equipment and processes from excess energy that could cause damage or safety issues. Circuit Protection principle is used in electrical circuits to prevent short circuits, wire conductor overheating and electrical equipment from damage due to other input regularities. Products range from circuit breakers to fuses and other overload and protection devices. Most applications which are connected to an external power source or run off batteries or charge batteries use these types of products.

プログラマブルロジック開発ボード

評価、開発ボード、キット

A Complex Programmable Logic Device (CPLD) is an IC that can be configured to perform arbitrary logic functions.&nbsp; They are usually configured through a special set of access pins called a JTAG port, named after the Joint Test Action Group, which defined the protocol, but programming methods are proprietary and may vary by manufacturer.&nbsp; A CPLD is non-volatile, meaning that the programmed state is retained even if power is removed. &nbsp;CPLDs are available that have more than one hundred IO pins and tens of thousands of programmable elements.

コンプレックス・プログラマブル・ロジック・デバイス - CPLD

Galaxy is an authorized distributor of FPGAs from industry-leading manufacturers. Find datasheets, pricing, and inventory for the available products below. Sort by Part #, Price, Stock, Manufacturer and many more.

フィールド・プログラマブル・ゲート・アレイ - FPGA

A Simple Programmable Logic Device (SPLD) is an IC that can be configured to perform arbitrary logic functions.&nbsp; An SPLD is very similar to a Complex PLD (CPLD), but an SPLD will have less IO pins and programmable elements, consume less power, and will often require a special programming device to configure, but programming methods are proprietary and may vary by manufacturer.&nbsp; SPLDs are non-volatile and retain their state after power is removed.

シンプルプログラマブルロジックデバイス(SPLD)

Programmable Logic Devices are the hardware foundation on which EDA can be implemented, and through programming, digital electronic systems can be built and modified flexibly and easily.

プログラマブルロジックデバイス

A programmable logic devices is an integrated circuit that can be programmed or configured to perform logic functions in an application. Field Programmable Logic Arrays (FPGAs) &amp; Complex Programmable Logic Devices (CPLDs) are examples of programmable logic devices.

プログラマブルデバイス

マルチプロトコルモジュール

NFC/RFIDタグ&トランスポンダ

フェーズ・ロック・ループ - PLL

レギュレーター/復調器

RFミキサー

RFスイッチIC

RF システム オン チップ - SoC

RFトランシーバ

RFワイヤレス接続

RFワイヤレスコネクティビティIC

RF回路

Radio Frequency (RF) and Microwave communication is the ability to communicate over Standard Radio or Micro Frequency waves. This allows communication of data over relatively large distances without the need for computing or communication devices to be physically connected together via a cable. Sometimes known as wireless communication the main applications are Industrial, Automotive, Consumer, Communication, IoT and Military.

無線周波数(RF

標準クロック発振器

標準発振器

An oscillator is a mechanical or electronic device that produces a periodic oscillating output, usually a sine or square wave. A crystal is a passive component that also produces a periodic oscillating output, but with a narrower frequency passband. Oscillators and crystals are often used in digital integrated circuits to provide an accurate clock source. Although crystal frequencies can range from high kHz to low kHz, phase-locked loops (PLLs) accurately multiply the input frequencies into the high MHz and low GHz ranges, which are useful in clocking high-speed circuits.

発振器&水晶振動子

A resistor is a basic circuit component. All resistors are passive; they only consume power and never provide power. A resistor allows current to flow when a voltage exists between its two terminals. Resistors come in many values, shapes, and form factors. Consumer electronics require small, precise resistors. In high-speed applications, it is important to minimise parasitic inductance and capacitance. Industrial applications may require resistors capable of consuming large amounts of power, so these resistors are naturally larger. There are also many technologies for manufacturing resistors: carbon composites, carbon film, metal film, and wirewound.

抵抗

Encoders are devices that convert movement or position into an electronically coded pattern that can be read by an electronic circuit or processor system. They are sensors that can form part of an electro-mechanical control system, like a servo motor, because they provide a mechanism to obtain feedback.

エンコーダー

アナログおよびデジタルIC

イーサネットIC

ネットワーク通信IC

ネットワークコントローラおよびプロセッサIC

有線および無線通信IC

通信およびネットワーキングIC

ゲートウェイ

通信モジュール

Communications &amp; Networking products are designed for both wired and wireless applications and used in a variety of markets. All electronic devices and systems for the acquisition or acceptance, processing, storage, display, analysis, protection, disposition, and transfer of information and the physical devices which are required for communication and interaction between devices on a network can be found in this category.

対応

アナログスイッチIC

デジタルバススイッチIC

多重化スイッチIC

USBスイッチIC

ビデオスイッチIC

スイッチングIC

A switching IC integrates a large number of electronic devices on a single chip, and the circuit controls the switching tube to conduct and cut off at high speed, thus completing the switching operation of the circuit.

ESD保護ダイオード/TVSダイオード

小信号スイッチングダイオード

電圧レギュレータ(ツェナー)ダイオード

ダイオード

双方向シリコンコントローラ

SCRの

サイリスタ

バイポーラ接合トランジスタ(BJT)

ダーリントントランジスタ(エレクトロニクス)

MOSFET(モスフェット)

トランジスタ

Diodes, transistors and thyristors are all semiconductor devices. Diodes and transistors form the basis of modern personal computers and mobile electronic devices. They are widely used throughout the electronics industry. Almost all electronic systems operate without them.

ダイオード、トランジスタ、サイリスタ

クロックとタイマー

クロックIC

Logic devices and timing components include wide variety of components dedicated to discrete fixed-function. These products include legacy logic gate devices, application-specific digital processing chipsets, and dedicated components for clock generation and precision timing applications. All Applications require some sort of timing and logic within their sub design.

クロックとタイミング

加速度センサー

オーディオセンサー

磁気センサ

光学センサー

近接センサー

温度センサー

アナログセンサー

電流センサー

デジタル温度センサー

湿度センサー

デジタルセンサー

Sensors are devices that can be used to measure the physical or electrical characteristics of an environment and convert the signal into another signal that can be read or interpreted by a person or machine. This type of device is called a transducer in reference to its ability to convert one signal into another. Sensors are currently in use all over the world. In today's electronic age most of the transducers generally convert various signals into electrical impulses that can be recognised by some kind of circuitry.

トランスデューサー

バッファとラインドライバ

ディスプレイ ドライバーとコントローラー

インターフェース - ドライバー

レーザードライバー

LCDドライバ

LEDディスプレイドライバ

LED照明ドライバー

ドライバーIC

1394インターフェースIC

CANインターフェースIC

デジタルアイソレータ

ディスプレイインターフェースIC

インターフェース - 特別な目的

インターフェース-コーデック

インターフェイス I/O エキスパンダー

インターフェース-信号バッファ、リピータ

LINトランシーバー

LVDSインターフェースIC

インターフェイス

Drivers &amp; Interfaces are a family of IC's that help in managing and controlling various functionalities in a system. Typical examples include Load drivers, serial communication ICs, CAN interface devices etc.

ドライバーとインターフェース

フォトカプラー

Optoelectronic devices convert electrical and optical signals back and forth, and the widespread use of CMOS devices makes analogue and digital signals easy to process and store electronically. However, optical signals have significant advantages in terms of high speed and long distance transmission.

光電

アナログフロントエンド - AFE

アナログ-デジタルコンバータ

データ・アクイジションADC/DAC

データコンバータIC

オーディオアナログ/デジタルコンバーター

オーディオIC開発ツール

オーディオIC

オーディオトランスミッター、レシーバー、トランシーバー

ビデオIC

マルチメディア

エンコーダ、デコーダ、マルチプレクサ、デマルチプレクサ

機能固有のロジック

ロジック - トリガー

ロジックコンパレータ

ロジックゲート

単安定マルチハーモニックオシレーター

特殊機能ロジックIC

プロフェッショナルロジック回路IC

バスレシーバー

バストランシーバ

カウンタ シフト レジスタ

DCコンバータ

ビーチサンダル

掛け金

登録する

タッチスクリーンコントローラー

翻訳者

USBハブとコントローラー

標準ロジック回路IC

Integrated circuits are widely used in a variety of electronic devices, such as computers, mobile phones, smart homes, communication equipment, medical equipment, automobiles and so on. Among them, digital integrated circuits are mainly used in computers, mobile phones and other fields; analogue integrated circuits are mainly used in audio, video, video cameras and other fields; mixed-signal integrated circuits are used in analogue signal digitization, digital signal simulation and other fields.Translated with DeepL.com (free version)

集積回路-IC

バッテリー管理

パワーマネージメントIC開発ツール

パワーモジュール

プロフェッショナル・パワー・マネージメント(PMIC)

アプリケーション固有

DC/DCコンバータ

ゲートドライバ

モーター/モーション/イグニッションコントローラーおよびドライブ

運転手

電流および電力モニタ、レギュレータ

モニター/トランスポンダー

監視回路

電圧モニタ

Power management refers to the process of controlling and distribution of electrical power in an applications like power supplies, motor control, traction, smartphones, tablets, wearables etc. Power Management ICs or PMICs are ICs that are specifically available for the process of controlling and distribution of electrical power.

パワーマネジメント

ショッピングカート

GALAXY

カテゴリ: 未定義

ショッピングカート